Hy-rib and metal lath for concrete, stucco and plaster in roofs, floors, walls, sidings, partitions, ceilings, furring, arches, conduits and tanks .. . ////PZ sppp py co/zcpppp £Tj?zj:s op- P/7/er/r/o/ps os jrr-^zs z^ppz f?zyz> czz/svmpz jtv&s 44 TRUSCON STEEL COMPANY Hollow Non-Bearing Partitions of Hy-Rib Lath and Studs Non-bearing hollow partitions are only required where extraordinary insulation isrequired. For practical conditions the solid non-bearing partition meets all requirements ofsoundproofness. as sound is usually carried between rooms, through doorways or crevices orby the flo


Hy-rib and metal lath for concrete, stucco and plaster in roofs, floors, walls, sidings, partitions, ceilings, furring, arches, conduits and tanks .. . ////PZ sppp py co/zcpppp £Tj?zj:s op- P/7/er/r/o/ps os jrr-^zs z^ppz f?zyz> czz/svmpz jtv&s 44 TRUSCON STEEL COMPANY Hollow Non-Bearing Partitions of Hy-Rib Lath and Studs Non-bearing hollow partitions are only required where extraordinary insulation isrequired. For practical conditions the solid non-bearing partition meets all requirements ofsoundproofness. as sound is usually carried between rooms, through doorways or crevices orby the floor. The solid monolithic metal lath partitions are more effective than many hollow-block partitions which contain unfilled crevices through which the sound penetrates. For the non-bearing hollow partition we furnish Truscon Hollow Studs (see Page 6),consisting of two % channels separated by spacing bars, furnished in sizes to form 4 to 8thick partitions. Hy-Rib Lath has the same advantages as in solid partitions. TRUSCON Pressed Steel Hollow Stud -24 TO 36-. STUD EXTENSION (FURNISHED IF DESIRED) Hollow Partitions with s Hy-Rib Lath and widely spaced Studs. SPECIFICATIONS FOR HOLLOW NON-BEARING PARTITIONS Provide Hy-Rib Metal Lath, type. . gauge and Trus-con Hollow Studs, size , for all partitions. Attach studs to floorand ceilings and provide for door frames,baseboards, etc., according to studs according to following table. Metal Lath Spac ing of Studs or iChannels in Partitions 24 ga. V8 Hy-Rib Lath 36 to 42 26 ga. % Hv-Rib Lath 32 to 36 28 ga. H Hy-Rib Lath 24 to 30 1-A Hy-Rib Lath 18 to 24 Rib Lath No. 4 18 to 24 Rib Lath No. 2 16 to 20 Rib Lath No 1 14to 16 Interlock all adjoining sheets of Hy-Rib Lath at sides and ends. Sheetsshall be securely fastened together bywiring every 24 inches along the sidesand every 4 inches at ribs at the Lath shall be rigidly attached tochannels or studs at least every 8 inches. Where end splices occur between sup-po


Size: 1943px × 1286px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No

Keywords: ., bookcentury1900, bookdecade1910, booksubjectconcret, bookyear1919