. Intensive farming and use of dynamite . INSERTINGFUSE AND CAP INCARTRIDGE FOLDING CARTRIDGE PAPER AROUND FUSE TYING CARTRIDGEPAPER AROUND FUSE ONE METHOD OF MAKING A PRIMER WITH BLASTING CAP AND FUSE EXPLOSIVES AND BLASTING SUPPLIES Every user of dynamite who has occasion to thaw it shouldmake it a rule never to heat water in the thawing kettle, but in someother receptacle, and then, after removing the dynamite, pour thehot water into the water compartment. This water should not beso hot that it would burn the hand. Water may be heated in theouter pail of two-piece thawing kettles, provided
. Intensive farming and use of dynamite . INSERTINGFUSE AND CAP INCARTRIDGE FOLDING CARTRIDGE PAPER AROUND FUSE TYING CARTRIDGEPAPER AROUND FUSE ONE METHOD OF MAKING A PRIMER WITH BLASTING CAP AND FUSE EXPLOSIVES AND BLASTING SUPPLIES Every user of dynamite who has occasion to thaw it shouldmake it a rule never to heat water in the thawing kettle, but in someother receptacle, and then, after removing the dynamite, pour thehot water into the water compartment. This water should not beso hot that it would burn the hand. Water may be heated in theouter pail of two-piece thawing kettles, provided the inner pail hasbeen removed; but it is never safe to put a one-piece thawing kettleover a fire, even after the dynamite has been removed, becauseenough nitroglycerin may have leaked out from dynamite previouslythawed, to cause an explosion if the thawing kettle is put over THAWING KETTLE A simple and effective thawing arrangement may be made bysuspending a small pail or bucket containing the dynamite in alarger bucket partly filled with warm water. Care must be takento prevent any of the water from getting into the inner pail, whichshould have a tight-fitting lid. The whole should be covered witha piece of carpet, or an old coat, until the dynamite has thawed. Priming Placing the detonator in a cartridge or charge of high ex-plosives is called priming it, and the cartridge or part of a cartridgewith the detonator in it is called the primer or primer cartridge. The first step in the preparation of the primer is to cut thenecessary length of fuse from the roll, cutting it squarely across andnot diagonally. After carefully inserting the fresh-cut end as faras it will go into the blasting cap, fasten the latter securely to thefuse with a cap crimper. When crimping the blasting cap to thefuse, the crimp should be made hear the end which the fuse enters,so as
Size: 1411px × 1771px
Photo credit: © Reading Room 2020 / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bo, bookcentury1900, bookdecade1910, bookidintensivefarming00penn
