sandersAssociates :: graphic7 :: GA-77-274 Rev F Graphic 7 Acceptance Test Procedure May1981 . by 2 . Verify that the indicator points to the end of that line. Theasterisk is not displayed for any line selected. As the PHOTOPEN is moved along the line, the indicator should remainfixed. At the extreme end of the line, the indicator is not the PHOTOPEN in this manner should be avoided, as notedpreviously. Points (or Dots) Data - Verify that the PHOTOPEN is pointed to anydot in the group noted by 3 , the indicator (less asterisk) points tothe same point or dot that is being sensed
sandersAssociates :: graphic7 :: GA-77-274 Rev F Graphic 7 Acceptance Test Procedure May1981 . by 2 . Verify that the indicator points to the end of that line. Theasterisk is not displayed for any line selected. As the PHOTOPEN is moved along the line, the indicator should remainfixed. At the extreme end of the line, the indicator is not the PHOTOPEN in this manner should be avoided, as notedpreviously. Points (or Dots) Data - Verify that the PHOTOPEN is pointed to anydot in the group noted by 3 , the indicator (less asterisk) points tothe same point or dot that is being sensed. The S in each indicator provides an indication of PHOTOPEN switchoperation. With the S displayed, while pointing the PH0T0PE1J at adata item, actuate the switch by pressing the PHOTOPEN against the CRTscreen. Verify that the S is removed or blanked. Verify that asecond actuation of the switch causes the S to reappear withindicator (arrow and number). SIZE A CODE I DENT NO. 94117 DWG NO. 1088690 SCALE SHEET 74 OF 107 OP—909 REV-A LJ l-Jtarf* NOTE REVISIONS LTR DESCRIPTION DATE APPROVED. Figure 4-13. PHOTOPEN Test Display Pattern If Conic Generator isinstalled, diamonds willbe circles as shown . SIZE CODE IDENT NO. 94117 SCALE ¥ DWG NO. 1088690 SHEET 75 OF 107 OP—909 REV—A REVISIONS LTR DESCRIPTION DATE SECTION INDICATOR OPTIONS TESTS SIZE CODE IDEM* NO. 94117 SCALE ¥ DWG NO. 1088690 APPROVED SHEET 76 OF 107 OP—909 REV—A REVISIONS LTR DESCRIPTION DATE APPROVED 4, 21-Inch Display Indicator Test General This test verifies operation of the 21-inch diagonal display indicator,either vertically or horizontally oriented. These units can be configuredfor either desk top or rack mounted operation. Procedure 1. 2. 3. 4. 5. 6. Refer to paragraph In place of the display indicator normallyprovided as support equipment for the terminal controller test, rsubstitute the display indicator being tested. Follow the procedure of paragraph to dis
Size: 1590px × 1571px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1910, booksubjectdisplay, bookyear1919
