Sheet metals and sheet metal products : no 292 . lied over the main roof shingles after they are all laid and nailedin place. The roof shingles are laid clear to the hip, allowed to project and cut off one inchbeyond the hip line. This projection is to be turned down over the hip and nailed. The shingles on the other side of the roof are allowed to project about one inch backover the hip line and over the side already finished, turned down and nailed. At the hip there is a double covering of shingles, both edges nailed. The hip shinglesare then laid in place and nailed, starting from the botto
Sheet metals and sheet metal products : no 292 . lied over the main roof shingles after they are all laid and nailedin place. The roof shingles are laid clear to the hip, allowed to project and cut off one inchbeyond the hip line. This projection is to be turned down over the hip and nailed. The shingles on the other side of the roof are allowed to project about one inch backover the hip line and over the side already finished, turned down and nailed. At the hip there is a double covering of shingles, both edges nailed. The hip shinglesare then laid in place and nailed, starting from the bottom upward, over-lapping each otherenough to make a tight joint. Any good carpenter or workman, who understands the simple rules for applying woodshingles or slate, will have no trouble in laying metal shingles. No solder is used. Onlya pair of snips and a hammer, the most ordinary of tools, are required. 50 WHEELING CORRUGATING CO., WHEELING, W. VA. Dixie Made in Painted Terne, Galvanized Sheet or Galvanized after being Stamped from Terne Plates. Size. . Number per Square . 7x 10312 10 x 14136 14 x 20 inch67 51 WHEELING CORRUGATING CO., WHEELING, W. VA. Virginia Tenuffteta Painted Terne Galvanized Sheet or Galvanized after being Stamped from
Size: 1278px × 1956px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1910, bookidsheetmetalsandsheetmetalp
