Handy man's workshop and laboratory . ©. Fig. 20—How the hingesare applied Fig. 21—Rack forchisels for the doors to bear against when closed, are secured to thebottom and underside of the top, 2 inches from the edges. Theseare shown in Fig. 18, and at C and Dx in Fig. 19. If desired, thetop and bottom can be made 12 inches square, and finished offwith a cornice, as shown at D and Dx. The cabinet can be supported on a bracket, made from a pieceof 3 x 4-inch timber, as detailed at E. Spikes driven into the wall,through the sides of the cabinet, will further secure it. Two hinges should be used o
Handy man's workshop and laboratory . ©. Fig. 20—How the hingesare applied Fig. 21—Rack forchisels for the doors to bear against when closed, are secured to thebottom and underside of the top, 2 inches from the edges. Theseare shown in Fig. 18, and at C and Dx in Fig. 19. If desired, thetop and bottom can be made 12 inches square, and finished offwith a cornice, as shown at D and Dx. The cabinet can be supported on a bracket, made from a pieceof 3 x 4-inch timber, as detailed at E. Spikes driven into the wall,through the sides of the cabinet, will further secure it. Two hinges should be used on each door, either made flush, asshown in the general view, Fig. 18, or on the outside, as shownin the detail view, Fig. 20. The furnishing of the cabinet is a matter of choice and dependsto a certain extent on how many tools are placed in it. The saws — i8 HANDY MANS WORKSHOP AND LABORATORY and lighter tools should be hnng upon the doors, the heavier toolsinside. Shelves and racks of wood or leather, for the bits andhandle tools
Size: 1232px × 2029px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., book, bookcentury1900, bookdecade1910, booksubjectworkshoprecipes
