. Canadian forest industries 1908. Lumbering; Forests and forestry; Forest products; Wood-pulp industry; Wood-using industries. Steady Brace for Grinding Tools and carries the tool to be ground. In this case the tool is a plane-iron damped with a thumb-screw. On to the post just back of the grind- stone has been screwed a strip of 3-8 by 1 inch iron, into which has been drilled a series of holes, part way through, one under the other, about 3-4 inch apart, and numbered. When the plane-iron has been clamped to the block so that the cutting edge is not more than 1 inch ahead of it, the pivot is
. Canadian forest industries 1908. Lumbering; Forests and forestry; Forest products; Wood-pulp industry; Wood-using industries. Steady Brace for Grinding Tools and carries the tool to be ground. In this case the tool is a plane-iron damped with a thumb-screw. On to the post just back of the grind- stone has been screwed a strip of 3-8 by 1 inch iron, into which has been drilled a series of holes, part way through, one under the other, about 3-4 inch apart, and numbered. When the plane-iron has been clamped to the block so that the cutting edge is not more than 1 inch ahead of it, the pivot is set in any hole and the iron dropped on the stone. A few seconds of grinding will show the new bevel and if this should not be what is wanted, set the pivot in another hole and try again. Not more than one or two changes will usually be required. When the proper hole has been found, note its number. With this device the stone may be turned by one hand and the tool NEW PLANER AND MATCHER. The Goldie & McCulloch Company, Limited, of Gait, Canada have recently put on the market a new planer and matcher to meet the modern requirements of the trade. This machine in intended for all kinds of planing and matching from 2 in. to 14 in. wide and 6 in. thick. It is strongly built, neat and compact. The frame being cast in one piece insures rigidity and constant alignment. The cylinders carry four knives and are each driven by two belts, the lower one being placed in front of the upper, trueing the stock before reaching the top head platon. This feature is especially valuable for hard wood flooring or band saw stock. The side heads are of the new and improved Philbrick pattern with inserted cutters specially designed for this work. They are carried on strong brackets with the latest and best adjustments. The spindles run in long self oiling bearings. When repairs are necessary the brackets are easily detached and lifted clear of the machine. bars are bolted to the brackets
Size: 2829px × 883px
Photo credit: © Book Worm / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1900, booksubjectforestsandforestry
