. Railway and locomotive engineering : a practical journal of railway motive power and rolling stock . i in. flat steel. There are two uprights A set 8in. apart at the center, with feet riveted to the bearers, asshown, and rising to a height of 3 ft. 6 in. These uprightsare braced on the outside by braces running down andriveted to the outer ends of the channels. These frames thus form a pocket 8 in. wide. 26J4 in. long and 42 in. deep into which the plates can be seton edge, while the end pieces form a base 6 ft. 4 in. longupon which they can rest. Chuck for Holding Air Pimp Packing Rings Thi
. Railway and locomotive engineering : a practical journal of railway motive power and rolling stock . i in. flat steel. There are two uprights A set 8in. apart at the center, with feet riveted to the bearers, asshown, and rising to a height of 3 ft. 6 in. These uprightsare braced on the outside by braces running down andriveted to the outer ends of the channels. These frames thus form a pocket 8 in. wide. 26J4 in. long and 42 in. deep into which the plates can be seton edge, while the end pieces form a base 6 ft. 4 in. longupon which they can rest. Chuck for Holding Air Pimp Packing Rings This chuck is intended for holding 9l/2 in. pump pack-ing rings while they are being faced off in a lathe. It. consists of a plain cast iron disc Yz in. thick with a hubextending back for 5/£ in. which is bored and threaded tofit the spindle of the lathe upon which it is to be used.
Size: 1603px × 1559px
Photo credit: © Reading Room 2020 / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1900, booksubjectrailroa, bookyear1901
