. Canadian forest industries July-December 1912. Lumbering; Forests and forestry; Forest products; Wood-pulp industry; Wood-using industries. Leaving the edgers. the stock is conveyed to a transfer table, and delivered to a two-saw trimmer 31 feet in length and arranged to trim from 6 to 16 ft. boards. From the trimmer the trimmed boards go to a 100-foot sorting table, where they are carefully graded. The filing room, built with plenty of head room, is well lighted from the roof and from the sides and generally laid out and equip- ped to give the greatest convenience and ease in handling the s
. Canadian forest industries July-December 1912. Lumbering; Forests and forestry; Forest products; Wood-pulp industry; Wood-using industries. Leaving the edgers. the stock is conveyed to a transfer table, and delivered to a two-saw trimmer 31 feet in length and arranged to trim from 6 to 16 ft. boards. From the trimmer the trimmed boards go to a 100-foot sorting table, where they are carefully graded. The filing room, built with plenty of head room, is well lighted from the roof and from the sides and generally laid out and equip- ped to give the greatest convenience and ease in handling the saws. It is located directlv above the band mills, and the saws are ele- vated and lowered through trap doors by a special wrought iron tackle, which makes an exceptionally fast and safe rig for getting the saws on and off the mills. The filing equipment consists of two Covel automatic band saw sharpeners and one Cove! circular saw sharpener, one power saw stretcher, one emery wheel lap grinder, a set of shears and a br-azzing forge. A small 10 vertical en- gine operates the filing room machinery, independently of the saw- mill proper and thus the filing room is in commission ft all times. Capacity of the Mill Since commencing operations in June of this year, the Wayaga- mack mill has more than exceeded the most sanguine expectations. Designed for a daily cut of 100,000 feet this figure has been easily reached and on more than one occasion a cut of from 30,000 to 40,- 000 feet over and above this estimated capacity has been made. This exceptional success reflects most favorably not only on the man- agement and personnel of the mill itself but also on the Waterous Engine Works Company of Rrantford, Out., by whom the mill was designed, built and equipped in its entirety. Practical Suggestions for Shop Practice Written specially for the Canada Lumberman by Frank Bowers With the advent of cheap power there is a very marked ten- dency among contracting carpenters to add wood-wor
Size: 1489px × 1677px
Photo credit: © Book Worm / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1910, booksubjectforests, bookyear1912