1919 illustrated and descriptive catalog of Whitin cotton waste machinery . ter figure would apply to the spinning of fine warp yarns, andthe former to the production of a very thick, soft twisted fillingor knitting yarn. The saving in Floor Space, as compared with the mule, is,of course, dependent upon the character of yarn spun. If it is athick, soft yarn, the amount of space saved would not be morethan 40%; but on fine counts, with a fair amount of twist (whichall fine yarns necessarily have), the saving would reach as high as§ or 66f %. The actual over all dimensions of a 144-spindle frame
1919 illustrated and descriptive catalog of Whitin cotton waste machinery . ter figure would apply to the spinning of fine warp yarns, andthe former to the production of a very thick, soft twisted fillingor knitting yarn. The saving in Floor Space, as compared with the mule, is,of course, dependent upon the character of yarn spun. If it is athick, soft yarn, the amount of space saved would not be morethan 40%; but on fine counts, with a fair amount of twist (whichall fine yarns necessarily have), the saving would reach as high as§ or 66f %. The actual over all dimensions of a 144-spindle frame,4-inch gauge, would be 5 feet 10 inches wide by 28 feet 6 inches Page 54 long. On a basis of two and one-half times greater spindle capacity,there would be in this above-mentioned area an equivalent of 360mule spindles. Pulleys: 14-inch diameter by 3-inch face, run 450 revolutionsper minute. Horse Power: About 50 spindles per horse power. Weights: Domestic: Export: Gross, 350 pounds per foot, Gross, 400 pounds per foot, Net, 270 pounds per foot. Cubic feet, 17. Paye 5o. GEARING DIAGRAM of WDGLEN 5PINNING FRAMEo DIAGRAM REFERENCES A = Change Gear 82, 83, 84 teeth. B = Change Gear, 22 to 28 teeth. C = Change Gear, 37 to 48 teeth. D = Elliptical Gear, 63 teeth. E = Elliptical Gear, 63 teeth. F = Change Gear, 24 to 40 teeth. G = Rope Pulley, 12 to 18 diameter. H = Rope Pulley, 9 to 14| diameter. J = Change Gear, 18 to 40 teeth. K = Change Bevel Gear, 20, 25, 30, 35, 40 teeth. L = Twister Head Whirl—variable diameter. M = Spindle Whirl—variable diameter. Page 56 TheCoiler System THE COILER SYSTEM for COTTON WASTE, ETC. This System is well known in the manufacture of cotton yarns,having been used for many years with the regular machinery forproducing low grade yarns from mixtures of waste and cotton, butmanufacturers for some time have been trying to avoid the operationof mixing waste with their regular work on account of rejection oforders and general criticism from buyers, be
Size: 1604px × 1558px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1910, bookidillustratedd, bookyear1919
