Cyclopedia of mechanical engineering; a general reference work Editor-in-chief Howard Monroe Raymond Assisted by a corps of mechanical engineers, technical experts, and designers of the highest professional standing . d render it somewhat difficult to be read by aworkman taking it up as an unfamiliar subject. Hence it is nownecessary to separately detail the parts, with the object in view oftransferring, in the simplest and most direct manner, specific infor-mation to Xhe workman which will enable him to construct theseveral parts. It is not enough now that the drawing be clear tothe man who m


Cyclopedia of mechanical engineering; a general reference work Editor-in-chief Howard Monroe Raymond Assisted by a corps of mechanical engineers, technical experts, and designers of the highest professional standing . d render it somewhat difficult to be read by aworkman taking it up as an unfamiliar subject. Hence it is nownecessary to separately detail the parts, with the object in view oftransferring, in the simplest and most direct manner, specific infor-mation to Xhe workman which will enable him to construct theseveral parts. It is not enough now that the drawing be clear tothe man who makes it; it must be clear, ahsohitely clear, to theshop mechanic, who has no means of knowing the designers plansexcept through the information which the drawing gives on itsface. This requires that the di-aftsman should [uit himself in theworkmans place, and forestall, by the explicit nature of his draw-ing, all possible questions which may arise in the shop. In thisway only can he hope to avoid errors of construction and the con-tinual annoyance of endless explanation of his orders. Plate G is to be a finished drawing, and the first thing to dois to lay out the sheet. The standard sheet for details which baa. MECHANTCAL DRAWIXa. 19 1 been adopted is 18 X 24 inclies trimming size, with J incli margini all round, so that the working space is 17 X 23 inches. • The rec-tiingle for the title is to be laid ofE 2i X 4 inches in the lowerriglit-liand corner, and must never be altered, either in size orposition. This does not mean that other sizes ai-e wrong, butonce a standard system is adopted it must be strictly adheredto, both for artistic and commercial reasons. The scale to whichthe drawing is to be made is indicated in the title corner on everyplate. The scales permissible for shop drawings in the United Statesare those readil}^ derived from the common foot rule, such asfull size, 6 inches r=: 1 foot, 3 inches = 1 foot, 1\ inches =1 foot. These are the most common, most easil


Size: 1298px × 1925px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No

Keywords: ., bookcentury1900, bookdecade1900, booksubjectmechanicalengineerin