![](http://www.alamy.com/thumbs/6/A2A4836F-F53D-4A2C-9A83-4F413E57DC2D/2AWGC46.jpg)
Locomotive appliances . FlG. 1. Corys Force Feed Lubricator for Oiling all Journals, Eccentrics and LinksWhile Engine is Running Full Speed. ing the highly desirable means of oiJing all importantbearings of the locomotive, while it is running at fullspeed, and this is fully accomplished direct from thecab, from where it is possible to oil each bearingsuccessively, or any particular bearing repeatedly,that may be giving temporary trouble by heating. (274) LOCOMOTIVE APPLIANCES. 275 The lubricator is placed, conveniently of access,in the cab (as shown in Fig. 1), and consists of an oilsupply res
Locomotive appliances . FlG. 1. Corys Force Feed Lubricator for Oiling all Journals, Eccentrics and LinksWhile Engine is Running Full Speed. ing the highly desirable means of oiJing all importantbearings of the locomotive, while it is running at fullspeed, and this is fully accomplished direct from thecab, from where it is possible to oil each bearingsuccessively, or any particular bearing repeatedly,that may be giving temporary trouble by heating. (274) LOCOMOTIVE APPLIANCES. 275 The lubricator is placed, conveniently of access,in the cab (as shown in Fig. 1), and consists of an oilsupply reservoir of one gallon capacity; at the lowerpart of this reservoir is seated a hollow conical valveA (Fig. 2); the cavity in this conical valve will holdabout one-eightieth of a gallon. This space inside of. Air or Steam Pressure Fig Force Feed Lubricator. conical valve is termed the oil discharge reservoir,and connects to oil supply reservoir by small valve/>, seated in upper part of hollow valve. The side ofthe hollow valve is perforated by a hole, E, one eighthinch diameter, that can be brought to coincide withany one of the 16 outlet holes at the base of oil supply 276 LOCOMOTIVE APPLIANCES. reservoir, that each connects with a line of pipe to agiven bearing. There are 16 notches on the upper rimof the lubricator, that when lever is brought to engagewith any one of these notches the hole in the side ofconical valve then coincides with a given hoJe, in base,to outlet pipe. When the lever is thus placed for anybearing desired to supply with oil, the valve shownattached to base, and connected to either steam orair pressure, is opened, and pressure enters throughsmall valve C, into the oil discharge reservoir, closingvalves B and D, and forcing contents of oil dischargereservoi
Size: 1353px × 1847px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1900, booksubjectlocomot, bookyear1901