Hy-rib and metal lath for concrete, stucco and plaster in roofs, floors, walls, sidings, partitions, ceilings, furring, arches, conduits and tanks .. . D PARTI-TIONS OF HY-RIB LATH ANDCHANNELS Provide Hy-Rib Metal Lath, type , and Truscon Pressed Steel Channels, size , for all partitions. Attach channels to floor and ceilings and provide for door frames,baseboards, etc., according to details. Spacechannels according to following table. Metal Lath Spacing of Studs orChannels in Partitions 24 ga. % Hy-Rib Lath26 ga. ys Hy-Rib Lath28 ga. Vs Hy-Rib Lath1-A Hy-Rib LathRib Lath No. 4Rib L
Hy-rib and metal lath for concrete, stucco and plaster in roofs, floors, walls, sidings, partitions, ceilings, furring, arches, conduits and tanks .. . D PARTI-TIONS OF HY-RIB LATH ANDCHANNELS Provide Hy-Rib Metal Lath, type , and Truscon Pressed Steel Channels, size , for all partitions. Attach channels to floor and ceilings and provide for door frames,baseboards, etc., according to details. Spacechannels according to following table. Metal Lath Spacing of Studs orChannels in Partitions 24 ga. % Hy-Rib Lath26 ga. ys Hy-Rib Lath28 ga. Vs Hy-Rib Lath1-A Hy-Rib LathRib Lath No. 4Rib Lath No. 2Rib Lath No. 1 36 to 4232 to 3624 to 3018 to 2418 to 2416 to 2014 to 16 Interlock all adjoining sheets of Hy-Rib Lathat sides and ends. Sheets shall be securelyfastened together by wiring every 24 inches alongthe sides and every 4 inches at ribs at the Lath shall be rigidly attached to channelsor studs at least every 8 inches. Where end splices occur between supports,splices in adjacent rows must be at least 2 ft. a lap of 2 inches where splices occur over thesupports, otherwise 8 inches. 43 HY-RIB AND METAL LATH. dptp/l op jjyp/s ppppprso/f zjy cojr/fEcr/o/f w/tp WOOD PL OOP PO/SPS
Size: 1077px × 2321px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1910, booksubjectconcret, bookyear1919
