. Axtell shaft and pole coupling ... Instructions for its application to carriages . rup, and the pole 40 in. at its end, which is anaverage height for Carriage horses. Measure distance A ns indicated and note in the table inwhich column the figure below B is found under-neath the drawing of the spring caps. If foi the distance A the least distance B is found to beless than that given in the table, an extension must beusad; this extension is shown below to be 5 inches longand adds about 3 inches to the distance A and distance half of this or H inches will be added to the distanceB as mea
. Axtell shaft and pole coupling ... Instructions for its application to carriages . rup, and the pole 40 in. at its end, which is anaverage height for Carriage horses. Measure distance A ns indicated and note in the table inwhich column the figure below B is found under-neath the drawing of the spring caps. If foi the distance A the least distance B is found to beless than that given in the table, an extension must beusad; this extension is shown below to be 5 inches longand adds about 3 inches to the distance A and distance half of this or H inches will be added to the distanceB as measured when compared with A after the extensionis put on, so that if the original distance A is 20 in. andB 8^ in. or U in. short of 10 inches, then the make A 23 in. and B lH hi. adding 3 inches to bothA and B which is right for B as it must not be less thanone half of A. If the shafts are new thewood may be straightenedin the bend to give the re-quired distance for B with-out the extension ; this may-also be done with old shaftsif they are made of goodhickory j<_ S** »axtellshaftpolec01lutt
Size: 2570px × 972px
Photo credit: © Reading Room 2020 / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1800, bookdecade1890, bookidaxtellshaftp, bookyear1892
