Hardening, tempering, annealing and forging of steel; a treatise on the practical treatment and working of high and low grade steel .. . 238 HARDENING^ TEMPERING AND ANNEALING. Directions: Set the plane of the centers below the spindleplane the distance required for clearance. Set both swivels andtable at zero. Large saws, up to 24 inches in diameter, such as are used incold saw cutting-off machines, are ground as shown in Fig. will be noticed that the universal head is here reversed on thetable and the tooth rest placed on the emery wheel head. Gear Cutter 161 and 162 re
Hardening, tempering, annealing and forging of steel; a treatise on the practical treatment and working of high and low grade steel .. . 238 HARDENING^ TEMPERING AND ANNEALING. Directions: Set the plane of the centers below the spindleplane the distance required for clearance. Set both swivels andtable at zero. Large saws, up to 24 inches in diameter, such as are used incold saw cutting-off machines, are ground as shown in Fig. will be noticed that the universal head is here reversed on thetable and the tooth rest placed on the emery wheel head. Gear Cutter 161 and 162 represent an elevation and plan of the gear-cutter grinding attachment. The platen which holds cutter isfitted to the slot in the table and clamped to it by bolt and nut.
Size: 1991px × 1255px
Photo credit: © The Reading Room / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1900, bookdecade1900, bookidhardeningtem, bookyear1903
