. American engineer and railroad journal . AGONAL FRAMEBRACE OF OAST STEEL, ATREAR OF LEADING AXLE. boxes after the methodused in Fox trucks. Thispermits of securing amplestrength in the frame cast-ing, and it does away witha large number of truck has three pointhangers 12 ins. long, calcu-lated to offer an initial lat-eral resistance ratio of the weight on thetruck. The design of thistruck seems a year ago this road experimented with a new ashpan in order to avoid the serious trouble of cast iron hopperscracking under the heat. The result was So satisfactory
. American engineer and railroad journal . AGONAL FRAMEBRACE OF OAST STEEL, ATREAR OF LEADING AXLE. boxes after the methodused in Fox trucks. Thispermits of securing amplestrength in the frame cast-ing, and it does away witha large number of truck has three pointhangers 12 ins. long, calcu-lated to offer an initial lat-eral resistance ratio of the weight on thetruck. The design of thistruck seems a year ago this road experimented with a new ashpan in order to avoid the serious trouble of cast iron hopperscracking under the heat. The result was So satisfactory as tolead to the adoption of the new plan. This construction em-bodies a cast steel frame, with plate steel side sheets. Theframe, being on the outside, is protected from the heat causedby accumulations of ashes inside the pan. All sheets arepunched to templets, and if one burns out, it is easily replaced,involving no further injury to the ash pan. With this con-struction the Brooks hopper slides are applied as indicated inthe THE NEW ASH PAN CONSTRUCTION, OF PLATE STEEL SHEETS UPON A CAST STEEL FRAME. 14 AMERICAN ENGINEER AND RAILROAD JOURNAL. THE APPLICATION OF INDIVIDUAL MOTOR DRIVESTO OLD MACHINE TOOLS. McKees Rocks Shops.—Pittsbubgh & Lake Ewe Railroad. ET K. V. WRIGHT, MECHANICAL ENGINEER. VI. SLOTTING MACHINES. The individual motor drive can usually be applied to an oldslotter very easily and with very little expense, outside of thecost of the electrical apparatus. The question to be considered. placed near the outer end of ihe sleeve thus allowing themotor to be brought quite close to the machine, and making theuse of a very short chain possible; the vibration caused bythe pull on the chain which varies at different parts of thestroke, due to reversal of the cutter head, was so great thatit became necessary to move the sprocket and flywheel inwardand as close to the frame of the machine as possible. Thedistance between chain sprocket centers could be redu
Size: 2377px × 1051px
Photo credit: © Reading Room 2020 / Alamy / Afripics
License: Licensed
Model Released: No
Keywords: ., bookcentury1800, bookdecade1890, booksubjectrailroadengineering
